This standard defines test logic that can be included in an integrated circuit (IC), as well as structural and procedural description languages, to provide standardized approaches to - testing the interconnections between integrated circuits once they have been assembled onto a printed circuit board (PCB) or other substrate; - testing the integrated circuit itself; and - observing, modifying, or loading data inside an integrated circuit during test, programming, configuration, or debug of the integrated circuit or the circuitry connected to the component.
Working Group Details
IEEE Standard for Test Access Port and Boundary-Scan Architecture
Circuitry that may be built into an integrated circuit to assist in the test, maintenance and support of assembled printed circuit boards and the test of internal circuits is defined. The circuitry includes a standard interface through which instructions and test data are communicated. A set of test features is defined, including a boundary-scan register, such that the component is able to respond to a minimum set of instructions designed to assist with testing of assembled printed circuit boards. Also, a language is defined that allows rigorous structural description of the component-specific aspects of such testability features, and a second language is defined that allows rigorous procedural description of how the testability features may be used.
IEEE Standard for Boundary-Scan-Based Stimulus of Interconnections to Passive and/or Active Components
Extensions to IEEE Std 1149.1™ that define the boundary-scan structures and methods required to facilitate boundary-scan-based stimulus of interconnections to passive and/or active components are specified. Such networks are not adequately addressed by existing standards, including those networks that are ac-coupled or differential. The selective ac stimulus generation enabled by this standard, when combined with non-contact signal sensing, will allow testing of the connections between devices adhering to this standard and circuit elements such as series components, sockets, connectors, and integrated circuits (ICs) that do not implement IEEE Std 1149.1. This standard also specifies Boundary-Scan Description Language (BSDL) extensions to IEEE Std 1149.1 required to describe and support the new structures and methods.