Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered. This Corrigendum is to replace equations in 4.3 and 5.3 and to correct the legend in Table 4 in 4.5.
- Sponsor Committee
- PE/IC - Insulated Conductors
Learn More - Status
- Inactive-Reserved Standard
- PAR Approval
- 2012-11-02
- Board Approval
- 2014-03-27
- History
-
- Published:
- 2014-04-04
- Inactivated Date:
- 2021-03-25
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More - Sponsor Committee
- PE/IC - Insulated Conductors
Learn More - Working Group
-
A08W/P1210_WG - Compatibility of Cable Jackets and Pulling Compounds Working Group
Learn More - IEEE Program Manager
- Ron Hotchkiss
Contact - Working Group Chair
- Michael Wright
P1210
IEEE Draft Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored 3 holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.
No Active Standards
No Superseded Standards
No Inactive-Withdrawn Standards
1210-2004
IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered. (An interpretation is available at http://standards.ieee.org/findstds/interps/1210-2004.html)