Inactive-Reserved Standard

IEEE 1301.3-1992

IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2.5 mm Connectors

Recommendations provide guidance in the implementation of the generic standard, IEEE Std 1301-1991, and the connector-related standards, such as IEEE Std 1301.1-1991 and IEEE Std 1301.3-1992. This recommended practice may be applied in all fields of electronics where equipment and installations are required to conform to a metric modular order. The IEEE 1301 metric equipment practices are in accordance with IEC 917 (1988) and IEC 917-0 (1989), including cabinet, rack, subracks, printed boards, and common connector-dependent dimensions for connector pitches of 2.5, 2.0, 1.5, 1.0, and 0.5 mm.

Sponsor Committee
C/MSC - Microprocessor Standards Committee
Learn More
Status
Inactive-Reserved Standard
Board Approval
1992-12-03
History
ANSI Approved:
1993-06-16
Published:
1992-11-30
Inactivated Date:
2019-11-07

Working Group Details

Society
IEEE Computer Society
Learn More
Sponsor Committee
C/MSC - Microprocessor Standards Committee
Learn More
Working Group
1301_WG - 1301 Working Group
IEEE Program Manager
Tom Thompson
Contact
Working Group Chair
Ralph Kearfott
No Active Projects
No Active Standards
No Superseded Standards

1301-1991

IEEE Standard for a Metric Equipment Practice for Microcomputers - Coordination Document

Administratively withdrawn January 2007 The metric mechanical coordination of microcomputer components, including the cabinet, rack, subracks, printed boards, and common connector-dependent dimensions for connector pitches of 2.5, 2.0, 1.5, 1.0, and 0.5 mm is addressed. This generic standard may be applied in all fields of electronics where equipment and installations are required to conform to a metric modular order. This choice of coordination dimensions for the mechanical structure for heights, widths, and depths lies within a homogeneous, metric, modular, three-dimensional grid as specified in IEC 917. The intent is to provide a single metric equipment practice for worldwide use.

Learn More

1301.1-1991

IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2 mm Connectors

1301.1-1991 Metric Equipment Practice for Microcomputers - Convention-Cooled 2 mm Conn (PDF)

Learn More

1301.2-1993

IEEE Recommended Practices for the Implementation of a Metric Equipment Practice (IEEE Std 1301-1991)

Recommendations provide guidance in the implementation of the generic standard, IEEE Std 1301-1991, and the connector-related standards, such as IEEE Std 1301.1-1991 and IEEE Std 1301.3-1992. This recommended practice may be applied in all fields of electronics where equipment and installations are required to conform to a metric modular order. The IEEE 1301 metric equipment practices are in accordance with IEC 917 (1988) and IEC 917-0 (1989), including cabinet, rack, subracks, printed boards, and common connector-dependent dimensions for connector pitches of 2.5, 2.0, 1.5, 1.0, and 0.5 mm.

Learn More

1301.4-1996

IEEE Standard for a Metric Equipment Practice for Microcomputers - Coordination Document for Mezzanine Cards

This standard establishes the metric modular order and coordination dimensions for mezzanine cards for use on host modules.

Learn More

Newswire

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.