Perferred voltage ratings above 230 kV nominal for alternating-current (ac) systems and equipment are provided, along with definitions of various types of system voltages.
- Sponsor Committee
- PE/SPDC - Surge Protective Devices Committee
Learn More - Status
- Inactive-Withdrawn Standard
- Superseding
- C92.2-1987
- Board Approval
- 1993-03-18
- History
-
- Withdrawn:
- 2007-03-28
- ANSI Approved:
- 1993-08-30
- Published:
- 1993-03-18
- Reaffirmed:
- 2004-06-24
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More - Sponsor Committee
- PE/SPDC - Surge Protective Devices Committee
Learn More - Working Group
-
HV3.4.18 - 3.4.18 Preferred Voltages & Insulation Coordination Std Maintenance WG
Learn More - IEEE Program Manager
- Christian Orlando
Contact - Working Group Chair
- Jonathan Woodworth
PC62.82.2
IEEE Draft Guide for the Application of Insulation Coordination
The calculation method for selection of phase-to-ground and phase-to-phase insulation withstand voltages for equipment is presented. This guide gives methods for insulation coordination of different air-insulated systems like transmission lines and substations. The methods of analysis are illustrated by practical examples.
No Active Standards
1313.1-1996
IEEE Standard for Insulation Coordination - Definitions, Principles and Rules
The procedure for selection of the withstand voltages for equipment phase-to-ground and phase-to-phase insulation systems is specified. A list of standard insulation levels, based on the voltage stress to which the equipment is being exposed, is also identified. This standard applies to three-phase ac systems above 1 kV.
No Inactive-Withdrawn Standards
1313.2-1999
IEEE Guide for the Application of Insulation Coordination
The calculation method for selection of phase-to-ground and phase-to-phase insulation withstand voltages for equipment is presented. This guide gives methods for insulation coordination of different air-insulated systems like transmission lines and substations. The methods of analysis are illustrated by practical examples.
C62.82.1-2010
IEEE Standard for Insulation Coordination--Definitions, Principles, and Rules
Revision of IEEE Std 1313.1-1996. The procedure for selection of the withstand voltages for equipment phase-to-ground and phase-to-phase insulation systems is specified. A list of standard insulation levels, based on the voltage stress to which the equipment is being exposed, is also identified. This standard applies to three-phase ac systems above 15 kV.