The primary focus of this guide is unjacketed, underground distribution cable installed direct buried or in conduit. The causes of corrosion in cable concentric neutral wire and strap and the methods available to detect this corrosion are described. The purpose of the concentric neutral and consequences of significant loss of the concentric neutral are discussed. Recommendations are made for the mitigation and control of the cable concentric neutral corrosion.
- Sponsor Committee
- PE/IC - Insulated Conductors
Learn More - Status
- Inactive-Reserved Standard
- PAR Approval
- 2002-06-13
- Board Approval
- 2007-09-27
- History
-
- Published:
- 2008-02-18
- Inactivated Date:
- 2021-03-25
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More - Sponsor Committee
- PE/IC - Insulated Conductors
Learn More - Working Group
-
F07W/1617_WG - Neutral Corrosion Working Group
Learn More - IEEE Program Manager
- Ron Hotchkiss
Contact - Working Group Chair
- Martin Von Herrmann
P1617
IEEE Draft Guide for Assessment, Mitigation, and Control of Corrosion of Metallic Shields in Extruded Dielectric Cables rated 5 kV to 46 kV
A summary of the methods for detection, mitigation, and control of metallic shield corrosion in 5 kV to 46 kV underground distribution cable installed in conduit or direct buried is provided in this guide. The causes of corrosion in metallic shields and the methods available to detect this corrosion are described. The purpose of the metallic shield and the consequences of significant loss of the metallic shield are discussed. Recommendations are made for the mitigation and control of the cable metallic shield corrosion.
No Active Standards
No Superseded Standards
No Inactive-Withdrawn Standards
No Inactive-Reserved Standards