A method of measuring the amplitude levels of an SMPTE 170M-1994; NTSC color or monochrome television video signal is described. It is concerned with luminance measurements at various points in transmission systems where the signals are at video frequencies. The methods described are limited to the use of waveform monitors, software video processing for amplitude assessment, or suitable oscilloscopes, and are primarily directed to specifying means of measuring television signal levels for operating purposes.
- Sponsor Committee
- BTS/AVTech - Audio and Visual Techniques
Learn More - Status
- Inactive-Withdrawn Standard
- PAR Approval
- 1996-06-20
- Superseding
- 205-1958
- Board Approval
- 2001-03-17
- History
-
- Withdrawn:
- 2007-01-18
- ANSI Approved:
- 2001-08-02
- ANSI Withdrawn Date:
- 2011-09-09
- Published:
- 2001-09-06
Working Group Details
- Society
- IEEE Broadcast Technology Society
Learn More - Sponsor Committee
- BTS/AVTech - Audio and Visual Techniques
Learn More - Working Group
-
G-2.1.4 - Video Distribution Working Group
Learn More - IEEE Program Manager
- Christy Bahn
Contact - Working Group Chair
- James Redford
No Active Projects
No Active Standards
No Superseded Standards
No Inactive-Withdrawn Standards
1521-2003
IEEE Standard for Measurement of Video Jitter and Wander
Reaffirmed March 2010. A set of metrics and methods to enable consistent measurement of the components of timing interval error in video synchronization signals is provided. By partitioning the spectra into regions of jitter and lower frequency wander (characterized as frequency offset and drift rate), timing performance can be better quantified for consistent control over nontraditional networks.
208-1995
IEEE Standard on Video Techniques: Measurement of Resolution of Camera Systems, 1993 Techniques
The methods for measuring the resolution of camera systems are described. The primary application is for users and manufacturers to quantify the limit where fine detail contained in the original image is no longer reproduced by the camera system. The techniques described may also be used for laboratory measurements and for proof-of-performance specifications for a camera.