Physical layer and data link layer specifications for power supply and communication over power lines from a dc power source to multiple dc loads are specified. Each receiver has its own physical address and is connected to the transmitter through a pair of power lines in a multidrop bus or tree topology. The dc power is sent by the transmitter. This dc power, by electrically changing the voltage of the wires, corresponds to the communication packets, including the control command/data for controlling the dc loads and the target address. Power to the dc loads with the transmitted and voltage-flattened dc power is supplied by each receiver. The control command/data and addresses from electric signals on the power line is decoded by each receiver, to be used for the connected dc loads control if the addresses match. The standard is in compliance with known electromagnetic compatibility (EMC) regulations.
- Sponsor Committee
- COM/PLC - Power Line Communications
Learn More - Status
- Active Standard
- PAR Approval
- 2019-11-07
- Board Approval
- 2021-11-09
- History
-
- Published:
- 2022-04-01
Working Group Details
- Society
- IEEE Communications Society
Learn More - Sponsor Committee
- COM/PLC - Power Line Communications
Learn More - Working Group
-
DCPTCL - DC Power Transmission and Communication to DC Loads Working Group
Learn More - IEEE Program Manager
- Jennifer Santulli
Contact - Working Group Chair
- SangKwon Jeong
No Active Projects
No Active Standards
No Superseded Standards
No Inactive-Withdrawn Standards
No Inactive-Reserved Standards