Active Standard

IEEE 383-2015

IEEE Standard for Qualifying Electric Cables and Splices for Nuclear Facilities

General requirements and methods for qualifying electric cables and splices for nuclear facilities are provided. Cable, wire, and splices within or integral to other devices (e.g., instruments, panels, motors) should be qualified using the requirements in the applicable device standard or IEEE Std 323(TM). However, this standard's requirements may be applied to the cable, wire and splices within these devices. For qualification of fiber optic cable, refer to IEEE Std 1682(TM).

Sponsor Committee
PE/NPE - Nuclear Power Engineering
Learn More
Joint Sponsors
PE/IC
Status
Active Standard
PAR Approval
2011-03-31
Superseding
383-2003
Board Approval
2015-09-03
History
ANSI Approved:
2016-09-14
Published:
2015-10-05

Working Group Details

Society
IEEE Power and Energy Society
Learn More
Sponsor Committee
PE/NPE - Nuclear Power Engineering
Learn More
Working Group
WG_2.4 - Working Group on Cables and Splices
Learn More
IEEE Program Manager
Christian Orlando
Contact
Working Group Chair
Robert Konnik

P383

Standard for Qualifying Electric Cables and Splices for Nuclear Facilities

This standard provides general requirements and methods for qualifying electric cables, and splices for nuclear facilities. Cable and splices within or integral to other devices (e.g., instruments, panels, motors) should be qualified using the requirements in the applicable device standard or IEC/IEEE Std 60780-323(TM)-2016. However, this standard's requirements may be applied to the cable and splices within these devices. For qualification of fiber optic cable, refer to IEEE Std 1682(TM).

Learn More

No Active Standards

383-2003

IEEE Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations

This standard provides general requirements, direction, and methods for qualifying Class1E electric cables, field splices, factory splices, and factory rework for service in nuclear power generating stations. Categories of cables covered are those used for power, control, and instrumentation services, including signal and communication cables. Field cables, wires, and splices are within the scope of this standard. Cables, wires, and splices within or integral to other devices(e.g., instruments, panels, motors, etc.) should be qualified using the requirements in the applicable device standard or IEEE Std 323TM-1983, as appropriate. However, this standard's requirements may be applied to the wire and cable within these devices.

Learn More

No Inactive-Withdrawn Standards
No Inactive-Reserved Standards
Newswire

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.