Excitation system models suitable for use in large-scale system stability studies are presented. Important limiters and supplementary controls are also included. The model structures presented are intended to facilitate the use of field test data as a means of obtaining model parameters. The models are, however, reduced order models and do not represent all of the control loops on any particular system. The models are valid for frequency deviations of +/-5% from rated frequency and oscillation frequencies up to 3 Hz. These models would not normally be adequate for use in studies of subsynchronous resonance or other shaft torsional interaction problems. Delayed protective and control features that may come into play in long term dynamic performance studies are not represented. A sample set of data for each of the models, for at least one particular application, is provided.
- Sponsor Committee
- PE/EDPG - Energy Development & Power Generation
Learn More - Status
- Superseded Standard
- PAR Approval
- 1997-12-09
- Superseded by
- 421.5-2016
- Superseding
- 421.5-1992
- Board Approval
- 2005-10-25
- History
-
- ANSI Approved:
- 2005-12-29
- Published:
- 2006-04-21
Additional Resources
- Interpretation
- 421.5-2005_interp.pdf
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More - Sponsor Committee
- PE/EDPG - Energy Development & Power Generation
Learn More - Working Group
-
ESCS -WG 421.5 - ESCS - Excitation System Models for Power System Stability Studies Working Group
Learn More - IEEE Program Manager
- Malia Zaman
Contact - Working Group Chair
- Les Hajagos
P421.5
Recommended Practice for Excitation System Models for Power System Stability Studies
This document provides mathematical models for computer simulation studies of excitation systems and their associated controls for three-phase synchronous generators. The equipment modelled includes the automatic voltage regulator as well as supplementary controls including reactive current compensation, power system stabilizers, and excitation limiters.
421.5-2016
IEEE Recommended Practice for Excitation System Models for Power System Stability Studies
Excitation system and power system stabilizer models suitable for use in large-scale system stability studies are presented. Important excitation limiters and supplementary controls are also included. The model structures presented are intended to facilitate the use of field test data as a means of obtaining model parameters. The models are, however, reduced order models and do not necessarily represent all of the control loops of any particular system. The models are valid for frequency deviations of u00b15% from rated frequency and oscillation frequencies up to 3 Hz. These models would not normally be adequate for use in studies of subsynchronous resonance or other shaft torsional interaction behavior. Delayed protective and control features that may come into play in long-term dynamic performance studies are not represented. A sample set of data for each of the models, for at least one particular application, is provided.
No Superseded Standards
No Inactive-Withdrawn Standards
No Inactive-Reserved Standards