Enclosed dc power circuit breakers of the stationary or drawout 32 type of one- or two-pole construction with one or more rated maximum voltages of 300 V, 325 V, 33 600 V, 800 V, 1000 V, 1200 V, 1600 V, or 3200 V for applications on dc systems having nominal 34 voltages of 250 V, 275 V, 500 V, 750 V, 850 V, 1000 V, 1500 V, or 3000 V, with general-purpose, 35 high-speed, semi-high-speed and rectifier circuit breakers; manually or power-operated; and with 36 or without electromechanical or electronic trip devices are covered in this standard. Service conditions, ratings, 37 functional components, temperature limitations and classification of insulating materials, dielectric 38 withstand voltage requirements, test procedures, and application are dealt with in this standard.
- Sponsor Committee
- PE/SWG - Switchgear
Learn More - Status
- Active Standard
- PAR Approval
- 2011-09-10
- Superseding
- C37.14-2002
- Board Approval
- 2015-03-26
- History
-
- ANSI Approved:
- 2016-08-25
- Published:
- 2015-06-03
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More - Sponsor Committee
- PE/SWG - Switchgear
Learn More - Working Group
-
LVSD-WG_PC37.14 - LVSD - Joint LVSD-VT Task Force (IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures)
Learn More - IEEE Program Manager
- Ashley Moran
Contact - Working Group Chair
- Lou Grahor
No Active Projects
No Active Standards
C37.14-2002
IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures
Reaffirmed 2008. Revision of IEEE Std C37.14-1999. This IEEE Standards product is part of the C37 family on Switchgear, Substations and Protective Relays. Abstract:This standard covers enclosed low-voltage dc power circuit breakers of the stationary or draw-out type of one- or two-pole construction with one or more rated maximum voltages of 300 V, 325 V, 800 V, 1000 V, 1200 V, 1600 V, or 3200 V for applications on dc systems having nominal voltages of 250 V, 275 V, 750 V, 850 V, 1000 V, 1500 V, or 3000 V, with general-purpose, high-speed, semi-high-speed and rectifier circuit breakers; manually or power-operated; and with or without electromechanical or electronic trip devices. It deals with service conditions, ratings, functional components, temperature limitations and classification of insulating materials, dielectric withstand voltage requirements, test procedures, and application.
No Inactive-Withdrawn Standards
No Inactive-Reserved Standards