Superseded Standard

IEEE C37.48-1987

IEEE Guide for Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories

Superseded. Information on the application, operation, and maintenance of high-voltage fuses (above 1000 V), distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories for use on AC distribution systems is provided. This guide is one of a series of complementary standards covering various types of high-voltage fuses and switches, so arranged that two of the standards apply to all devices while each of the other standards provides additional specifications for a particular device. For each device, IEEE Std C37.40-1993, IEEE Std C37.41-1994, plus the standard covering that device, constitute a complete set of standards for each device. In addition, IEEE Std C37.48-1997 is an application, operation, and maintenance guide for all the devices.

Sponsor Committee
PE/SWG - Switchgear
Learn More
Status
Superseded Standard
Superseded by
C37.48-1997
Amendments
C37.48a-1989
C37.48c-1991
Board Approval
1983-12-08
History
ANSI Approved:
1987-07-09
Published:
1987-12-28
Reaffirmed:
1992-06-18

Working Group Details

Society
IEEE Power and Energy Society
Learn More
Sponsor Committee
PE/SWG - Switchgear
Learn More
Working Group
HVF-WG_C37.42 - High Voltage Fuses -C37.42
IEEE Program Manager
Ashley Moran
Contact
Working Group Chair
Mark Stavnes
No Active Projects

C37.42-2016

IEEE Standard Specifications for High-Voltage (>1000 V) Fuses and Accessories

Specifications for high voltage (above 1000 volts) Class A and Class B expulsion and current-limiting fuses. This includes: a) Expulsion type Class A [distribution class] fuses, fuse cutouts, fuse disconnecting switches, their associated fuse links or refill units, disconnecting cutouts, and accessories for these devices with rated voltages from 1 through 38 kV. b) Expulsion type Class B [power class] fuses, fuse disconnecting switches, their associated fuse links or refill units, disconnecting cutouts, and accessories for these devices with rated voltages from 1 through 170 kV. c) Class A and Class B current-limiting fuses and accessories for these devices with rated voltages 1 through 38 kV. d) Distribution and power class expulsion, current-limiting, and combination-type external capacitor fuses and accessories, with rated voltages from 1 kV through 38 kV, for protecting shunt capacitors complying with IEEE Std 18 and NEMA CP 1. e) Any of the above devices used in fuse enclosure packages. f) All of these devices are intended for use on alternating current distribution systems. This standard also supersedes IEEE C37.43-2008, IEEE C37.46-2010 and IEEE C37.47-2011.

Learn More

C37.40-1981

American National Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories

Service conditions and definitions for high-voltage fuses (above 1,000 V), distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories for ac distribution systems are covered. These include enclosed, open, and open-link types of distribution cutouts and fuses; distribution current-limiting fuses; distribution oil cutouts; distribution enclosed single-pole air switches; power fuses, including current-limiting types; outdoor and indoor fuse disconnecting switches; fuse supports, mountings, hooks, and links, all of the type used exclusively with the above; and removable switch blades for certain products among the above.

Learn More

C37.40-1993

IEEE Standard Service Conditions and Definitions for High Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches & Accessories

Service conditions and definitions for high-voltage fuses (above 1000 V), distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories for ac distribution systems are covered. These include enclosed, open, and open-link types of distribution cutouts and fuses; distribution current-limiting fuses; distribution oil cutouts; distribution enclosed single-pole air switches; power fuses, including current-limiting types; outdoor and indoor fuse disconnecting switches; fuse supports, mountings, hooks, and links, all of the type used exclusively with the above; and removable switch blades for certain products among the above.

Learn More

C37.42-2009

IEEE Standard Specifications for High-Voltage (> 1000 V) Expulsion-Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links, and Accessories Used with These Devices

This standard establishes specifications for high voltage (above 1000 volts) expulsion type distribution class fuses, fuse cutouts, fuse disconnecting switches, their associated fuse links and disconnecting cutouts, and accessories for these devices. All of these devices are intended for use on alternating current distribution systems. These specifications apply to the following specific types of equipment: a) Open and enclosed types of fuses and fuse cutouts b) Open and enclosed fuse disconnecting switches c) Fuse links of the type used exclusively with distribution class fuses, fuse cutouts, and fuse disconnecting switches. d) Open-link types of fuses, cutouts, and their associated fuse links e) Open and enclosed types of disconnecting cutouts f) Fuse supports, fuse mountings and fuse hooks of the type used exclusively with distribution class fuses, fuse cutouts, fuse disconnecting switches, and disconnecting cutouts. g) Fuse holders and removable switch blades of the type used exclusively with distribution class fuse supports. h) Mounting brackets used for distribution class equipment and other accessories.

Learn More

C37.48-1997

IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories

Information on the application, operation and maintenance of high-voltage fuses (above 1000 V), distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories for use on ac distribution systems is provided. This guide is one of a series of complementary standards covering various types of high-voltage fuses and switches, so arranged that two of the standards apply to all devices while each of the other standards provide additional specifications for a particular device. For each device, IEEE Std C37.40-1993, IEEE Std C37.41- 1994, plus the standard covering that device, constitute a complete set of standards for each device. In addition, IEEE Std C37.48-1997 is an application, operation, and maintenance guide for all the devices.

Learn More

C37.53.1-1989

American National Standard High-Voltage Current-Limiting Motor-Starter Fuses -- Conference Test Procedures

These tests shall be used to demonstrate that the motor-starter fuses being tested conform with the specified ratings and characteristics. The standard is designed to cover a product that can be used with Class E2 controllers (fused) as described in Table 27.1 and elsewhere in the American National Standard Safety Standard for High Voltage Industrial Control Equipment, ANSI/UL 347-1985.

Learn More

No Inactive-Reserved Standards
Newswire

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.