This standard was revised and greatly expanded in 1948, 1949, and 1956. The 1956 edition was comprised of a revision and editorial consolidation of the preceding standards on distribution, power , and regulating transformers, namely American Standard Requirements for Distribution, Power , and Regulating Transformers, and Reactors Other Than Current-Limiting Reactors, C57.12-1949, American Standard Test Code for Distribution , Power, and Regulating Transformers , C57.22-1948, and American Standard Requirements for Transformers-67,000 Volts and Below; 501 Through 10,000 kva, 3 Phase ; 501 Through 5,000 kva, 1 Phase, C57.12a-1954. In addition, in order to eliminate cross-references wherever possible, the consolidation contained excerpts from other standards of the C57 family
- Sponsor Committee
- PE/TR - Transformers
Learn More - Status
- Superseded Standard
- History
-
- Published:
- 1968-03-22
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More - Sponsor Committee
- PE/TR - Transformers
Learn More - Working Group
-
Std. WG - Cont. Revision C57.1 - Standards Working Group on the Continuous Revision of C57.12.00
Learn More - IEEE Program Manager
- Malia Zaman
Contact - Working Group Chair
- Steve Snyder
PC57.12.00
Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
This standard describes electrical and mechanical requirements of liquid-immersed distribution and power transformers, and autotransformers and regulating transformers, single-phase and polyphase, with voltages of 601 V or higher in the highest voltage winding. This standard applies to all liquid-immersed distribution, power, and regulating transformers that do not belong to the following types of apparatus: a) Instrument transformers; b) Step voltage and induction voltage regulators; c) Arc furnace transformers; d) Rectifier transformers; e) Specialty transformers; f) Grounding transformers; g) Mobile transformers; h) Mine transformers
C57.12.00-2021
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single-phase and polyphase, with voltages of 601 V or higher in the highest voltage winding, are set forth. This standard is a basis for the establishment of performance, and limited electrical and mechanical interchangeability requirements of equipment are described; it is also a basis for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed distribution, power, and regulating transformers except the following: instrument transformers, step voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers.
C57.12.00-2000
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
Superseded by IEEE Std C57.12.00-2006 Electrical,mechanical,and safety requirements are set forth for liquid-immersed distribution and power transformers,and autotransformers and regulating transformers; single and polyphase, with voltages of 601 V or higher in the highest voltage winding. This standard is a basis for the establishment of performance,limited electrical and mechanical interchangeability, and safety requirements of equipment described;and for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed distribution, power, and regulating transformers except the following: instrument transformers, step-voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers.
C57.12.00-2006
IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
Electrical, mechanical, and safety requirements are set forth for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single and polyphase, with voltages of 601 V or higher in the highest voltage winding. This standard is a basis for the establishment of performance, limited electrical and mechanical interchangeability, and safety requirements of equipment described; and for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed distribution, power, and regulating transformers except the following: instrument transformers, step-voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers.
C57.12.00-2010
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single- and polyphase, with voltages of 601 V or higher in the highest voltage winding, are set forth. This standard is a basis for the establishment of performance, and limited electrical and mechanical interchangeability requirements of equipment are described; it is also a basis for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed distribution, power, and regulating transformers except the following: instrument transformers, step voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers.
C57.12.00-2015
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and auto-transformers and regulating transformers; single-phase and polyphase, with voltages of 601 V or higher in the highest voltage winding, are set forth. This standard is a basis for the establishment of performance, and limited electrical and mechanical interchangeability requirements of equipment are described; it is also a basis for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed distribution, power, and regulating transformers except the following: instrument transformers, step voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers.
No Inactive-Withdrawn Standards
No Inactive-Reserved Standards