This corrigendum corrects IEEE Std C57.19.03-1996. The standard applies to outdoor and indoor power apparatus dc bushings of condenser type that have basic impulse insulation levels of 110 kV and above for use as components of oil-filled converter transformers and smoothing reactors, as well as air-to-air dc bushings. This standard defines the special terms used, service conditions, rating, general requirements, electrical insulation characteristics, and test procedure for the bushings for dc application
- Sponsor Committee
- PE/TR - Transformers
Learn More - Status
- Superseded Standard
- PAR Approval
- 2004-02-27
- Board Approval
- 2005-12-07
- History
-
- ANSI Approved:
- 2006-03-28
- Published:
- 2006-06-06
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More - Sponsor Committee
- PE/TR - Transformers
Learn More - Working Group
-
Bushing-WGC57.19.03 - Bushing - Req. & Testing of DC Bushings Working Group
Learn More - IEEE Program Manager
- Malia Zaman
Contact - Working Group Chair
- Eric Weatherbee
P65700-19-03
Standard - Bushings for DC Application
This International Standard applies to outdoor and indoor bushings of any voltage used on dc systems, of capacitance graded or gas insulated types for use as components of oil-filled converter transformers and smoothing reactors, as well as air to air dc bushings. This standard does not apply to the following: - cable terminations (potherads); - bushings for instrument transformers; - bushings for test power supplies; - bushings applied with gaseous insulation(other than air at atmospheric pressure) external to the bushing; - bushings for industrial application; - bushings for traction application; - bushings for distribution class transformers; This standard makes reference to IEC 60137 for general terms and conditions and defines the special terms used, operating conditions, ratings, test procedures as well as general mechanical and electrical requirements for bushings for dc application.
65700-19-03-2014
IEC/IEEE International Standard -- Bushings for DC application
In this first edition of IEC/IEEE 65700-19-03, service experiences as well as established market requirements have been harmonized with existing IEC and IEEE standards
C57.19.03-1996
IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications
This standard applies to outdoor and indoor power apparatus dc bushings of condenser type that have basic impulse insulation levels of 110 kV and above for use as components of oil-filled converter transformers and smoothing reactors, as well as air-to-air dc bushings. This standard defines the special terms used, service conditions, rating, general requirements, electrical insulation characteristics, and test procedure for the bushings for dc application.
No Inactive-Withdrawn Standards
No Inactive-Reserved Standards