Active PAR

IEEE PC62.82.2

IEEE Draft Guide for the Application of Insulation Coordination

The calculation method for selection of phase-to-ground and phase-to-phase insulation withstand voltages for equipment is presented. This guide gives methods for insulation coordination of different air-insulated systems like transmission lines and substations. The methods of analysis are illustrated by practical examples.

Sponsor Committee
PE/SPDHV - Surge Protective Devices/High Voltage
Learn More
Status
Active PAR
PAR Approval
2010-12-08
Superseding
1313.2-1999

Working Group Details

Society
IEEE Power and Energy Society
Learn More
Sponsor Committee
PE/SPDHV - Surge Protective Devices/High Voltage
Learn More
Working Group
HV3.4.18 - 3.4.18 Preferred Voltages & Insulation Coordination Std Maintenance WG
Learn More
IEEE Program Manager
Christian Orlando
Contact
Working Group Chair
Jonathan Woodworth
No Active Projects
No Active Standards

1313.1-1996

IEEE Standard for Insulation Coordination - Definitions, Principles and Rules

The procedure for selection of the withstand voltages for equipment phase-to-ground and phase-to-phase insulation systems is specified. A list of standard insulation levels, based on the voltage stress to which the equipment is being exposed, is also identified. This standard applies to three-phase ac systems above 1 kV.

Learn More

1312-1993

IEEE Standard Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal

Perferred voltage ratings above 230 kV nominal for alternating-current (ac) systems and equipment are provided, along with definitions of various types of system voltages.

Learn More

1313.2-1999

IEEE Guide for the Application of Insulation Coordination

The calculation method for selection of phase-to-ground and phase-to-phase insulation withstand voltages for equipment is presented. This guide gives methods for insulation coordination of different air-insulated systems like transmission lines and substations. The methods of analysis are illustrated by practical examples.

Learn More

C62.82.1-2010

IEEE Standard for Insulation Coordination--Definitions, Principles, and Rules

Revision of IEEE Std 1313.1-1996. The procedure for selection of the withstand voltages for equipment phase-to-ground and phase-to-phase insulation systems is specified. A list of standard insulation levels, based on the voltage stress to which the equipment is being exposed, is also identified. This standard applies to three-phase ac systems above 15 kV.

Learn More

Newswire

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.