Active Standard

IEEE C93.3-2017

IEEE Standard Requirements for Power-Line Carrier Line Traps (30 kHz to 500 kHz)

Line traps inserted into a power line to provide a high impedance at power-line-carrier frequencies (30 kHz to 500 kHz) are covered in this standard. The purpose is to isolate the carrier signal from system impedance changes due to faults or switching behind the point of insertion, and to guide the signal in the proper direction. The standard covers line traps in which the main coil is designed as a single-phase, air-cooled inductor of the dry type.

Sponsor Committee
PE/PSCC - Power System Communications and Cybersecurity
Learn More
Joint Sponsors
PE/PSCC
Status
Active Standard
PAR Approval
2016-05-12
Superseding
C93.3-1995
Board Approval
2017-02-14
History
ANSI Approved:
2018-07-02
Published:
2017-08-01

Working Group Details

Society
IEEE Power and Energy Society
Learn More
Sponsor Committee
PE/PSCC - Power System Communications and Cybersecurity
Learn More
Working Group
PC93.3 - Revision of ANSI/NEMA C93.3 - Standard for the Requirements for Power-Line Carrier Line Traps
Learn More
IEEE Program Manager
Erin Morales
Contact
Working Group Chair
Bruce Pickett
No Active Projects
No Active Standards
No Superseded Standards
No Inactive-Withdrawn Standards
No Inactive-Reserved Standards
Newswire

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.