Tag: Electromagnetic-compatibility

IEEE C95.1-2345-2014

Recommendations to protect personnel in military environments against established adverse health effects associated with exposure to electric, magnetic, and electromagnetic fields, induced and contact current, and contact and arcing voltages over the frequency range of 0 Hz to 300 GHz are provided in this standard. IEEE Std C95.1-2345(TM) was developed to replace North Atlantic Treaty Organization (NATO) Standardization Agreement (STANAG) 2345 (Edition 3), Evaluation and Control of Personnel Exposure to Radio Frequency Fields–3 kHz to 300 GHz, (13 February 2003). (The PDF of this standard is available at no charge at the compliments of the United States Navy, United States…

IEEE 11073-10418-2011/Cor 1-2015

A normative definition of communication between personal telehealth International Normalized Ratio (INR) devices (agents) and managers (e.g., cell phones, personal computers, personal health appliances, and set top boxes) is established in this standard in a manner that enables plug-and-play interoperability. Work done in other ISO/IEEE 11073 standards is leveraged, including existing terminology, information profiles, application profile standards, and transport standards. The use of specific term codes, formats, and behaviors in telehealth environments restricting optionality in base frameworks in favor of interoperability is specified. A common core of functionality of INR devices is defined in this standard. In the context of…

IEEE/IEC 62704-1-2017

The scope of this standard is to define the methodology for the application of the finite difference time domain (FDTD) technique when used for determining the peak spatial-average specific absorption rate (SAR) in the human body exposed to wireless communication devices with known uncertainty. It defines methods to validate the numerical model of the device under test (DUT) and to assess its uncertainty when used in SAR simulations. Moreover, it defines procedures to determine the peak spatial average SAR in a cubical volume and to validate the correct implementation of the FDTD simulation software. This document will not recommend specific…

IEEE C37.09-2018

The testing procedures for all high-voltage circuit breakers that include voltage ratings above 1000 V ac and comprise both indoor and outdoor types having the preferred ratings as listed in IEEE Std C37.04(TM) are covered. Typical circuit breakers covered by these standards have maximum voltage ratings from 4.76 kV through 800 kV, and continuous current ratings of 600 A through 5000 A associated with the various maximum voltage ratings. The test procedures verify all assigned ratings, including continuous current, dielectric withstand voltages, short-circuit current, transient recovery voltage, and capacitor switching, plus associated capabilities such as mechanical endurance, load current, and…

IEEE 497-2016

Established in this standard are criteria for variable selection, performance, design, and qualification of accident monitoring instrumentation for anticipated operational, design basis events and severe accidents.

IEEE 1785.2-2016

Specifications for rectangular waveguide interfaces are given in this standard. It considers the tolerances of the waveguide interface dimensions and the effect these have on the electrical properties (in terms of reflection coefficient) of the waveguide.

IEEE 1785.3-2016

Recommendations for summarizing the performance and the expected uncertainty of the reflection coefficient of rectangular-waveguide apertures and interfaces for 110 GHz and above are provided in this recommended practice. The information provided also facilitates the development of a complete uncertainty analysis for the performance of rectangular waveguide interfaces. For example, it includes the dimensional information essential for calculating the uncertainty of both reflection and transmission coefficients through interfaces provided by different manufacturers if both follow this recommended practice.

IEEE 802.1AEbw-2013

The optional use of Cipher Suites that make use of a 64-bit (PN) to allow more than 232 MACsec protected frames to be sent with a single Secure Association Key are specified by this amendment.

IEEE 802.1Qbu-2016

Enhancements to the forwarding process that support frame preemption are provided in this amendment to IEEE Std 802.1Q-2014.

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.