Tag: Green-and-clean-technology

IEEE 1680.2a-2017

The following three criteria: “Required–End-of-life processing requirements” (currently 4.6.2.1); “Optional–Manufacturer recyclers or reuses toner material collected through its cartridge and container take-back program” (currently 4.9.3.2); and “Optional–Manufacturer recyclers or reuses plastics collected through its cartridge and container take-back program” (currently 4.9.3.3) are revised in this amendment.(The PDF of this standard is available to you at no cost to you, sponsored by Green Electronics Council, through the IEEE GET Program https://ieeexplore.ieee.org/browse/standards/get-program/page)

IEEE/ISO/IEC 18881-2016

This standard describes network gateway access, control, and management; specifies control and management requirements; defines the system architecture, communication sequences, and enhanced functions for the protocols defined in IEEE 1888(TM), “Ubiquitous Green Community Control Network Protocol”; and extends the protocols and interfaces based on the requirements. This standard shall provide enhanced protocols, workflows, and message formats for the network gateway under control and management, such as registration, access, control, event handling, configuration, status querying, etc.

IEEE/ISO/IEC 18883-2016

The enhanced security management function for the protocol defined in IEEE 1888(TM), “Ubiquitous Green Community Control Network Protocol,” is described in this standard. Security requirements, system security architecture definitions, and a standardized description of authentication and authorization, along with security procedures and protocols, are specified. This standard can help avoid unintended data disclosure to the public and unauthorized access to resources, while providing enhanced integrity and confidentiality of transmitted data in the ubiquitous green community control network.

IEEE 305-1969

Electric, power systems, having outgrown simplicity a long time ago, continue to require more and better protection as the demand for power increases and the need for reliability becomes greater. Protective relaying has met this challenge by providing more sensitive, higher speed relay systems that are inherently reliable. Among the more significant protective developments that furthered the economic design of power systems are pilot, relaying schemes and direct, transfer tripping over telephone channels. In recent years a growing need developed for more versatile wire-pilot relay systems and more secure means for direct transfer tripping. These factors, in addition to technological…

IEEE 2404-2016

Criteria for testing methods and technical parameters for geometrical features, physical and chemical properties, and de-nitrogen oxides (DeNOx) technological properties of power plant DeNOx plate-type catalysts are established in this standard.

IEEE/ISO/IEC 18880-2015

The standard identifies gateways for field-bus networks, data storage for archiving and developing data sharing platforms, and application units as important system components for developing digital communities, i.e., building-scale and city-wide ubiquitous facility networking infrastructure. The standard defines a data exchange protocol that generalizes and interconnects these components (gateways, storage, application units) over the IPv4/v6-based networks. This enables integration of multiple facilities, data storage, application services such as central management, energy saving, environmental monitoring, and alarm notification systems.

IEEE 1547.1-2020

The type, production, commissioning, and periodic tests, and evaluations that shall be performed to confirm that the interconnection and interoperation functions of equipment and systems interconnecting distributed energy resources with the electric power system conform to IEEE Std 1547 are specified in this standard.

IEEE 1888-2014

The standard identifies gateways for field-bus networks, data storage for archiving and developing data sharing platforms, and application units as important system components for developing digital communities, i.e., building-scale and city-wide ubiquitous facility networking infrastructure. The standard defines a data exchange protocol that generalizes and interconnects these components (gateways, storage, application units) over the IPv4/v6-based networks. This enables integration of multiple facilities, data storage, application services such as central management, energy saving, environmental monitoring, and alarm notification systems.

IEEE 2030.5-2013

The 'APPLICATION' layer with TCP/IP providing functions in the 'TRANSPORT' and 'INTERNET' layers is defined in this standard. Depending on the physical layer in use (e.g., IEEE 802.15.4(TM), IEEE 802.11(TM), IEEE 1901(TM)), a variety of lower layer protocols may be involved in providing a complete solution. Generally, lower layer protocols are not discussed in this standard except where there is a direct interaction with the application protocol. This standard defines the mechanisms for exchanging application messages, the exact messages exchanged including error messages, and the security features used to protect the application messages. With respect to the OSI network model,…
Newswire

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.