Tag: Nuclear Power

IEEE Trial Use Standard for Safety Systems for Nuclear Power Generating Stations

This standard establishes functional and design criteria for nuclear power generating station "safety systems," that is, that collection of systems required to minimize the probability and magnitude of release of…

IEEE Guide for the Design and Installation of Cable Systems in Power Generating Stations

Cable performance requirements mentioned in this section are particular requirements which should be considered in specifying cable for installation in generating stations. Certain requirements, such as radiation, apply only to…

IEEE Trial Use Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations

The protection of nuclear power plants following a design basis event is provided automatically by the protection systems as defined by IEEE Std 279-1971 (ANSI N42.7-1972), Criteria for Protection Systems…

IEEE Standard Supplementary Requirements for the Calibration and Control of Measuring and Test Equipment Used in the Construction and Maintenance of Nuclear Power Generating Stations

This standard sets forth the requirements for a calibration program to control and verify the accuracy of M&TE (measuring and test equipment) which is used to assure that important parts…

IEEE Guide for Planning of Pre-operational Testing Programs for Class 1E Power Systems for Nuclear Power Generating Stations

This document provides guidance for pre-operational testing of Class IE Power systems for nuclear-power generating stations. The extent of the system shall be that covered by IEEE Std 308-1974, Standard…

IEEE Trial Use Guide for Class 1E Control Switchboards for Nuclear Power Generating Stations

This document applies to all Class IE control switchboards (for example, main control room assemblies, auxiliary panels, local panels or racks, etc) as defined in Section 3, regardless of their…

IEEE Standard Application of the Single-Failure Criterion to Nuclear Power Generating Station Class 1E Systems

This document interprets the single failure criterion, discusses failures, and presents an acceptable method of single failure analysis for Class IE systems

IEEE Definitions of Terms Used in IEEE Standards on Nuclear Power Generating Stations

All of the terms and definitions in this document have been taken from current IEEE standards on nuclear power generating stations. The source of each definition is indicated by a…

IEEE Standard for Qualification of Safety Related Valve Actuators

This standard describes the qualification of all types of power-driven valve actuators, including damper actuators, for safety-related functions in nuclear power generating stations. This standard may also be used to…
Newswire

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.