Made in this guide are suggestions on testing the dielectric strength of the insulation separating the various turns from each other within multi-turn form-wound coils to determine the acceptability of…
This guide provides a list of factors to consider when planning, designing, permitting, installing, commissioning and repairing submarine power cable systems. While many factors are common to both power and…
Information and guidance for characterizing radiated levels of electromagnetic (EM) noise or interference that may be present in various environments between 10 kHz and 40 GHz are provided in this…
Described in this recommended practice are very low frequency withstand and diagnostic tests that are performed on the stator windings of ac electric machines.
50 Hz or 60 Hz synchronous generators driven by diesel engines, steam turbines, combustion gas turbines, and hydro-turbines are covered in this guide. The drive may be direct or through…
Instructions for conducting tests to determine the performance characteristics of permanent magnet (PM) machines are contained in this guide. Motors and generators may have the described tests applied as needed,…
Outlined in this document are standardized terminology and indexes for reporting electric generating unit reliability, availability, and productivity performance measures that recognize the power industry's needs, including marketplace competition. This…
Procedures for cleaning contaminated electrical insulators (excluding nuclear, toxic, and hazardous chemical contaminants) of all types, using various equipment and techniques, are provided in this guide.
A summary of the methods for detection, mitigation, and control of metallic shield corrosion in 5 kV to 46 kV underground distribution cable installed in conduit or direct buried is…
